Radiolink AT10 II 2.4G 12CH Transmitter With R12DS Receiver & PRM-01 (Mode 1) - Gray

0 Reviews | Write a Review | RL-AT10II

 

Part Number: RL-AT10II

 

 

Product Description

The new AT10 II 12 channel radio transmitter from Radiolink is here and packed with features. The AT10II V2 uses the latest version antenna and electronics design technology to provide up to 4Km of control range with unmatched latency and precision. This radio is built upon the trusted AT10 radio and uses DSSS and FHSS spread spectrum technology synchronously to provide reliable and anti interference free performance. The included R12DS 12 channel receiver comes with diversity antenna and PRM-01 telemetry hub to transmit flight controller MAV link data back to your radio. The improved SMPS circuit design ensures low power consumption and provides upto 12hr standby time on a 3S 1800 mAh lipo. One of the best features of the AT10II is its full telemetry capability, with the PRM-01 module features like RSSI signal strength feedback, receiver voltage and external lipo voltage can be displayed. With add-on PRM-02 module other OSD features such as GPS, Speed, Alt and Flight controller functions can be displayed on the AT10II display.

Programming the AT10II is easy with the dial jog wheel and center located press to enter button. The 3.5" colourful display screen makes navigation through the Basic & Advanced progam menu easy and precise. Simulator mode turns off radio to power saving mode. Revere polarity protection is built-in, means no worry of short circuits making it totally safe and wide input voltage range ensure multiple battery support. Accepts 8xAA Nicads or 3-4S Lipo with universal JST connector. Programmable mix controls, customised functions, USB port for future firmware updates, Multiple type alarms and programing for Multiple model functions make this radio a worthy competitor to the ever popular FRsky Taranis.

Features:

  • 12 channel output with 3ms latency
  • Synchronous DSSS and FHSS spread spectrum for unmatched noise tolerance
  • High precision 4096 channel resolution
  • 3.5" colorful screen 320×480 resolution
  • 4km Range with new version 7dbi high gain TX antenna
  • 12 channel diversity receiver with dual antenna.
  • Low power consumption with improved SMPS circuit design
  • Real-time data telemetry
  • Suppports SBUS, PWM and PPM 
  • Supports menu function for Aircraft, Heli, Glider & Multirotors
  • Programmable mixing control
  • Reverse polarity protection
  • USB port for future firmware upgrades
  • Multiple type alarm function for safety
  • Left and right assignable slider switches
  • Three assignable rotary knobs
  • Two assignable three-position switches
  • One momentary two-position trainer switch
  • Five assignable two-position switch
  • Available in 2 colors Orange / Black & Grey / Black

Included with the package:

  • Radiolink AT10 II 2.4G 12CH Transmitter With R12DS Receiver & PRM-01 (Mode 1) - Grey / Black x 1

 

Specifications:

  • Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)
  • Modulation mode: QPSK
  • Channel Bandwidth: 5Mhz
  • Spread Spectrum: DSSS and FHSS
  • Adjacent channel rejection: <100mW (20dBm)
  • Operating current: <105mA
  • Operating voltage: 7.4-15V
  • Range: up to 4Km (depends on flying environment)
  • Channels: 12, (5-12 customisable)
  • Compatible vehicles: all 120 degree and 90 degree swash-plate helicopters, fix wings, multirotors
  • Simulator mode: under the simulator mode, the transmitter will turn off and change to power saving mode
  • Screen: 3.5", 320 x 480 pixels
  • Supported receivers: R6DS, R6DSM, R9DS, R12DS (R12DS is included with the radio)
  • Stick Mode: 1 (Throttle on Right)
  • Size: 180 x 95 x 220mm
  • Weight: 0.95Kg
  • Color: Grey/Black

 

Note:
  • This is a Mode 1 radio, throttle on the Right
  • A battery is not included with this radio, we suggest you use a 2S/3S 450-1000mAh battery with JST-SYP connector
  • Other brand receivers not supported, please see specifications for compatibility

 

Be First to Write a Review!