News : Hyperion-world

-- Earn 5% Off Your Next Purchase! Order Now And Receive A 5% Coupon USA Only

-- Free Shipping On Orders More Than $150! USA Only*

-- Hyperion Is Now Home to AirCraft-World.com Exclusive Items

Arduino Compatible PIR Motion Sensor

Old Price: $2.95

Special Price: $1.48

Part Number: HP-ASE-PIR

Ships from :

USA

IN STOCK

Available: 10+ Shipping Info*

Get creative with your friends and families

The Passive Infrared Sensor (PIR) sensor module is used for motion detection. It is often referred to as "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a dome shaped Fresnel lens. It is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems.

7 areas of Applications of PIR Sensors

  • All outdoor Lights
  • Lift Lobby
  • Multi Apartment Complexes
  • Common staircases
  • For Basement or Covered Parking Area
  • Shopping Malls
  • For garden lights

Features:

  • Infrared Sensor with Control Circuit Board
  • The Sensitivity and Holding Time Can be Adjusted
  • Complete with PIR, Motion Detection
  • Dual Element Sensor with Low Noise and High Sensitivity
  • Supply Voltage – 5V
  • Delay Time Adjustable
  • Standard TTL Output

Included with the package:

  • Arduino Compatible PIR Motion Sensor x 1

Specifications:

  • Color: White + Green OR White + Blue
  • Working Voltage Range: DC 4.5V- 20V
  • Current Drain: <60uA
  • Detection Range: <140°
  • Voltage Output: High/Low level Signal: 3.3V TTL output
  • Detection Distance: 3 to 7m (can be adjusted)
  • Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
  • Blockade time: 2.5s (Default)
  • Work temperature: -20-+80°C
  • Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
  • Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
  • Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S)

Information:

    What is a PIR Sensor? PIR sensor detects a human being moving around within approximately 10m from the sensor. This is an average value, as the actual detection range is between 5m and 12m.PIR are fundamentally made of a pyro electric sensor, which can detect levels of infrared radiation. For numerous essential projects or items that need to discover when an individual has left or entered the area. PIR sensors are incredible, they are flat control and minimal effort, have a wide lens range, and are simple to interface with.
    Most PIR sensors have a 3-pin connection at the side or bottom. One pin will be ground, another will be signal and the last pin will be power. Power is usually up to 5V. Sometimes bigger modules don’t have direct output and instead just operate a relay which case there is ground, power and the two switch associations. Interfacing PIR with microcontroller is very easy and simple. The PIR acts as a digital output so all you need to do is listening for the pin to flip high or low. The motion can be detected by checking for a high signal on a single I/O pin. Once the sensor warms up the output will remain low until there is motion, at which time the output will swing high for a couple of seconds, then return low. If motion continues the output will cycle in this manner until the sensors line of sight of still again. The PIR sensor needs a warm-up time with a specific end goal to capacity fittingly. This is because of the settling time included in studying nature’s domain. This could be anyplace from 10-60 seconds. Throughout this time there ought to be as little movement as could reasonably be expected in the sensors field of perspective.

*This product is not produced or endorsed by Arduino.